Welcome! Already a customer? Log in
Help & Information
top : Refilling Guides : HP Cartridges
HP 51626A Black Cartridge
For HP Deskjet 340, 350, 400, 420, 500, 510, 520, 540, 550, 560, 600, 610, 612, 640, 670, 680, 690, 693, 694, 695 printers
1. Air pressure within the cartridge is regulated by an aerator (Aperture C), which must be sealed to prevent leakage during refilling. Use strong adhesive tape to seal this aperture.
2. If the filling hole (Aperture B) is sealed by a plastic ball in the top, push in the ball using an old ballpoint pen.
If the cartridge does not have this opening, using the drill bit supplied with the kit, a 3mm hole must be carefully drilled in the position shown. (Aperture B)
IMPORTANT - The aperture in the centre of the top (Aperture A) must NOT be pierced.
3. Assemble the syringe and steel filling tube and fill with 10ml of JR INKJET print head cleaner.
4. Inject the print head cleaner into the filling hole. Shake well for about 30 seconds, and then remove the used fluid using the syringe. Clean syringe.
5. Fill syringe with ink then inject into the filling hole. When ink overflows from filling hole or starts to leak from print heads, cartridge is full. Stop injecting ink immediately.
6. Seal the hole with the plug provided. If the plug seal is not airtight, then secure and seal plug with strong adhesive tape. This seal MUST be airtight, if not cartridge will leak.
7. Blot print heads with tissue to remove any excess ink.
IMPORTANT - DO NOT LEAVE ON TISSUE. Remove the tape over aperture C and continue to blot if necessary.
8. Allow cartridge to stand on a protective, non-absorbent surface overnight to ensure no leakage. Blot print heads again and check for leakage.
9. Install cartridge and run a priming cycle as per printer instructions.
| Most popular: |
|
Epson Stylus C42 Epson Stylus C44 Epson Stylus C64 Epson Stylus C70 Epson Stylus C80 Epson Stylus Photo R300 Epson PictureMate HP Deskjet 710 HP Deskjet 5150 HP Laserjet 1300 Canon BJC 3000 Canon BJC 6000
|




