Welcome! Already a customer? Log in
Help & Information
top : Refilling Guides : Epson Cartridges
Epson T036 Black Cartridge
For Epson 300, 400, 440, 460, 480, 500, 580, 600, 640, 660, 670, 680*, 685*, 700, 740, 750, 760, 777*, 780*, 790*, 800, 810*, 820 (New Model), 840, 850, 860, 870*, 875*, 880, 890*, 895*, 900, 915*, 925*, 980, 1160, 1200, 1270*, 1280*, 1290*, 1520, C20, C40, C42*, C60*, C62* printers(* denotes chipped cartridge which requires re-programming with a Zap-It chip reprogrammer)
1. Seal the outlet hole in the base of the cartridge with adhesive tape.
2. Push the steel filling tube through the label to make filling hole. The correct hole is positioned across the centre of the cartridge.
3. Assemble the syringe and steel filling tube and fill with ink.
4. Push steel filling tube into the filling hole as shown in diagram.
IMPORTANT - The cartridge contains a sponge and slight resistance may be felt.
SLOWLY inject ink into the cartridge. When ink overflows from filling hole cartridge is full. Stop injecting ink immediately.
5. Unused ink may be returned to bottle. Clean syringe with water and dry for future use or use with a different colour ink.
6. DO NOT remove tape from outlet hole. DO NOT seal filling hole. Leave cartridge to stand on a protective, non-absorbent surface overnight to ensure no leakage and to give the ink time to saturate the sponge.
7. Install the cartridge and run a cleaning cycle as per printer instructions.
IMPORTANT - For best results, refill whilst ink still remains in cartridge. Empty cartridges should be refilled immediately.
