Welcome! Already a customer? Log in
Help & Information
top : Refilling Guides : Epson Cartridges
Epson S020036 Colour Cartridge
For Epson Stylus Colour, Pro printers
1. Seal the outlet hole(s) in the base of the cartridge with adhesive tape.
2. Peel back the bottom edge of the sticky label to reveal the sealed filling hole(s).
3. Assemble the syringe and steel filling tube and fill with appropriate colour ink.
4. Puncture the seal to the filling hole with an old ballpoint pen. (See diagram for filling hole colour) Push the steel filling tube down into the cartridge.
IMPORTANT - The cartridge contains sponge and a slight resistance may be felt.
5. SLOWLY inject up to 10ml of ink. When ink overflows from filling hole, cartridge is full. Stop injecting ink.
6. When all colours are filled, seal filling holes with strong adhesive tape.
DO NOT remove tape from outlet holes.
7. Unused ink may be returned to the bottle. Clean syringe with water and dry for future use or use with a different colour.
8. Leave cartridge to stand overnight on a protective, non-absorbent surface to ensure no leakage and to give the ink time to saturate the sponge.
9. Install cartridge and run a priming cycle as per printer instructions.
IMPORTANT - For best results, refill whilst ink still remains in cartridge. Empty cartridge should be refilled immediately.
