Refilling Information This section contains useful information on how to go about refilling your inkjet printer with Jet Tec Inkjet Refill Kits. Compatibility guide: Check here to see if your printer is compatible with Jet Tec Inkjet refill kits (please note that this is not a comprehensive list) Check here for a list of cartridges which are known NOT to be compatible

Preparation Cartridge handling, amount of ink to inject etc

Injecting Ink HP, Canon, Lexmark, Epson & Epson Compatible

Finishing off Sealing plugs, Cartridge flush etc

Notes:

• Only refill fresh cartridges. If your cartridge has been empty more than a couple of days, the likelihood of success is greatly reduced.
• Remove the cartridge from the printer before refilling, refill only over a protected area.
• Magenta is Red and Cyan is Blue.
• If the instructions call for a "standing time", make sure the cartridge is on a non-absorbent surface.
• Inject ink only into the correct chamber, mixing ink colours will ruin your cartridge.

Epson users:
Epson have also developed a new range of cartridges which appear to have been designed to make satisfactory refilling virtually impossible. This range of cartridges currently includes the C64, C70, C80, C82, C84, CX5100, CX5200 and CX6400 models. Cartridge Save offer a range of compatible cartridges for these printers, and have designed them specifically to enable straightforward refilling. They come ready filled with high quality ink, and have a chip which can be re-programmed with the JR Inkjet Zap-It when the cartridge is empty. This empty cartridge can then be refilled using the Jet Tec Inkjet refill kits.

Tell a friend about this page